Official PPG Sigma distribution • Poland and Europe+48 533 220 562 · handlowy@marfarb.pl

Technical guide

Benefits of epoxy coatings for protecting steel and concrete

Epoxy coatings form the basis of many industrial protective systems. They combine very good adhesion with mechanical and chemical resistance, so they are used on steel, concrete and in heavily used facilities.

Why does epoxy protect steel effectively?

On a correctly prepared substrate, epoxy paint forms a dense, impermeable film that limits water, oxygen and contaminants reaching the metal. It can act as a primer, intermediate coat or, under suitable conditions, a service coat.

An anticorrosive system depends on more than the paint itself: surface cleanliness and profile, the number of coats and their total thickness also matter. The product must therefore be selected for the corrosivity category and expected protection period.

  • very good adhesion to prepared steel
  • high abrasion and impact resistance
  • the ability to form thick, impermeable coats
  • good resistance to oils and many chemicals

Use on concrete

Epoxy can strengthen and seal prepared concrete surfaces. It is used on floors, plinths, process components and surfaces that need to be easier to keep clean.

Concrete must be adequately cured, sound, dry within the limits required by the product data sheet, and free of laitance. Moisture trapped beneath an excessively impermeable film can cause blistering or delamination.

The main limitation: UV exposure

Many epoxies chalk and change colour in sunlight. This does not necessarily mean an immediate loss of anticorrosive protection, but it does impair the coating's appearance. Outdoors, epoxy is often protected with a polyurethane topcoat that retains colour and gloss better.

Need a specific system?

Describe your project and exposure conditions.

We will help select PPG Sigma products and estimate the required quantity.

Send an enquiry