Official PPG Sigma distribution • Poland and Europe+48 533 220 562 · handlowy@marfarb.pl

Technical guide

Industrial coatings for metal roofs

Refurbishing a metal roof requires identification of the substrate, existing coating and corrosion sources. A correctly selected system should adhere to the prepared metal, resist water and UV, and have flexibility appropriate to temperature changes.

Start by assessing the roof

Establish whether the roof is carbon steel, galvanized steel, aluminium or factory-coated sheet. The condition of the old coating, leaks, corrosion around joints, gutters and screws, and the feasibility of safe surface preparation all matter.

Surface preparation

Remove loose rust and unsound paint, and thoroughly wash and degrease the whole surface. A stable old coating should be abraded, and compatibility with the new system confirmed by a test. On galvanized surfaces it is especially important to remove zinc corrosion products and use a system with verified adhesion.

Primer and topcoat

Exposed steel usually needs an anticorrosive primer. The topcoat provides weather resistance and colour. Polyurethane topcoats or appropriately selected acrylics often work well in exterior systems.

  • do not coat a wet or overheated roof
  • check dew point and the weather forecast
  • protect edges, joints and previously corroded areas
  • carry out an adhesion test on the old coating

Need a specific system?

Describe your project and exposure conditions.

We will help select PPG Sigma products and estimate the required quantity.

Send an enquiry