Official PPG Sigma distribution • Poland and Europe+48 533 220 562 · handlowy@marfarb.pl

Technical guide

SigmaFast 210 HS — use, spreading rate and primer-finish benefits

PPG SigmaFast 210 HS is a two-component high-build polyurethane primer-finish. It can combine the functions of the primer and topcoat, potentially shortening the production cycle.

Where is SigmaFast 210 HS used?

The product is intended primarily for protecting steel and correctly prepared galvanized steel. It is well suited to shop fabrication, steel structures and projects where reducing the number of coating operations matters.

  • steel structures and components
  • galvanized steel after correct preparation
  • shop fabrication
  • single-coat systems selected for the operating conditions

Spreading rate and parameters

The product data sheet gives a theoretical spreading rate of 8.9 m²/l at a dry film thickness of 75 µm. The recommended DFT range is 75–150 µm, and solids content is 67 ± 2%. Actual consumption will exceed the theoretical figure and depends on component shape, surface profile and application method.

The coating becomes touch dry after approximately 1.5 hours under the conditions specified in the documentation. It can cure at temperatures down to -5°C, making it easier to plan work in cooler conditions.

Why is it a useful primer-finish solution?

The main benefit is obtaining protection and an attractive finish from one product. Fewer coats can mean shorter completion times, fewer mixing and spraying operations, and simpler material logistics.

This does not mean that one coat replaces every multi-coat system. In aggressive environments or where particular durability requirements apply, the system must be confirmed against exposure, surface preparation and PPG documentation.

Need a specific system?

Describe your project and exposure conditions.

We will help select PPG Sigma products and estimate the required quantity.

Send an enquiry